Ordering a replacement part by faucet brand alone can leave you with a repair kit that doesn't fit. The brand tells you who made the faucet, but the valve mechanism inside — cartridge, ball, ceramic disc, or compression (washer-style) — determines which type of replacement part you need, and the same brand can use different valve types across different faucet lines.
The Four Common Valve Types
A compression faucet (older style, usually with separate hot/cold handles) uses a rubber washer that seals against a valve seat when you turn the handle — these are the faucets that eventually drip because the washer wears down. A cartridge faucet uses a sealed cartridge unit that moves up/down and side to side to control flow and temperature in a single handle, and replacing it means swapping the whole cartridge, not a small washer. Ball-type and ceramic-disc faucets use their own distinct mechanisms, each with their own specific replacement part — none of these four types share interchangeable parts with each other.
Why This Causes So Many Wrong Orders
A compression washer and a cartridge look nothing alike, so once you know which type you have, ordering rarely goes wrong — the actual mistake usually happens when someone orders a cartridge for the right brand but the wrong cartridge model number, since manufacturers often use several cartridge variants across their own faucet lineup. The fix is the same either way: identify the mechanism first, then match the exact part number, not just the brand name.
| Valve type | How to recognize it | What you're replacing |
|---|---|---|
| Compression | Separate hot/cold handles, older style | Rubber washer at the valve seat |
| Cartridge | Single handle, common in modern faucets | Full cartridge unit, matched by model number |
| Ball-type | Single handle, rounded cap under the handle | Ball assembly and O-rings |
| Ceramic disc | Single handle, often a lever-style handle | Ceramic disc cartridge |
Where to Actually Find Your Valve Type
Removing the handle (usually one screw, sometimes hidden under a decorative cap) reveals the mechanism underneath, which is the most reliable way to identify valve type — faucet model numbers are often printed on the underside of the faucet body or on original paperwork, and that model number is what manufacturers use to confirm the correct cartridge or part variant.
Checking Part Compatibility Before You Order
Faucet Parts organizes replacement parts by valve type, which narrows the search considerably once you've identified the mechanism rather than searching by brand name alone across a mixed catalog.
A Few Things People Ask
Q: Can a compression faucet be converted to a cartridge system?
Generally no — the faucet body itself is built around one mechanism type, so converting to a different valve type usually means replacing the entire faucet, not just swapping an internal part.
Q: Is it safe to guess a cartridge model number if the original packaging is gone?
It's risky — a visually similar cartridge that's the wrong model can leak or fail to seal properly even though it physically fits, so matching the exact model number (or bringing the old cartridge to compare) is worth the extra step before installing.
Before You Order a Replacement Faucet Part
- Remove the handle first to identify the actual valve mechanism, not just the faucet's outward style
- Don't assume one brand uses the same valve type across all its faucet lines
- Match the exact cartridge or part model number, not just a visually similar part
- Keep the old part on hand when ordering, if possible, for a side-by-side comparison
- Check whether the issue is the valve part or a separate O-ring/seal before replacing the whole cartridge
A faucet repair only goes smoothly once the valve type is confirmed first — everything else, including the exact part number, follows from that one identification step. Skipping it can leave you with a "correct" replacement part that still doesn't solve the leak.