Finding Drafts: A Home Energy Guide

Finding Drafts: A Home Energy Guide

Introduction

A draft stopper only helps if it's solving the actual draft you have — and plenty of households buy one for the front door while the real leak is under a bedroom door or along a window sill. Before buying anything, it's worth spending ten minutes actually finding where cold air is getting in.

The Hand Test

On a cold or windy day, run your hand slowly along door edges, window sills, and baseboards where you suspect a draft — a noticeable temperature drop or air movement against your skin is a real leak, not just a guess. This simple test catches most common household drafts without any special equipment.

The Candle or Tissue Test

Hold a lit candle (carefully) or a thin strip of tissue paper near a suspected gap and watch for flickering or movement — this makes faint drafts visible that are too subtle to feel reliably with your hand alone, especially useful for window sills and less obvious gaps like electrical outlets on exterior walls.

Common Draft Sources Beyond the Front Door

Interior doors to unheated spaces (a garage, an attic access door) often leak as much as exterior doors but get overlooked since they don't face the outside. Window sills, especially on older windows, are a frequent source that a door-focused search misses entirely. Sliding glass doors are notorious for drafts along their track, which needs a different draft-stopper style than a standard hinged door.

Matching the Fix to the Gap

A standard under-door draft stopper (the classic tube or triangle shape) works for consistent, even gaps along the bottom of a hinged door. A window sill draft stopper needs a longer, often more flexible design to fit a window's specific width — the Draft Stopper for Window Sill, 47 Inches is a dedicated option for this spot, so check its length against your actual sill width before buying. Most draft-stopper lines only cover doors, so this is worth checking for if your leak is coming from a sill. Sliding glass doors generally need a different weatherstripping approach than a floor-level stopper, since the draft often comes from the track and side seals rather than the bottom.

Before You Buy

  • Run the hand test on every exterior door, window sill, and unheated-space interior door
  • Use a candle or tissue test on spots where the hand test wasn't conclusive
  • Measure the exact width of each gap you're addressing, not just the door's nominal size
  • Confirm whether you're dealing with a hinged door, a sliding door, or a window before choosing a product style
  • If your gap is at a window sill, confirm the exact stopper length (like the 47-inch option above) against your sill's real width rather than assuming one size fits all windows

Our Draft Stoppers collection includes styles for hinged doors, sliding doors, and window sills in a range of sizes.

Conclusion

Finding your actual draft sources before buying anything saves you from solving the wrong problem — a ten-minute check with your hand or a simple candle test tells you exactly where to focus. Later this week we'll cover sizing a stopper to your exact gap, comparing materials, and installation tips.